Print Page - Obi20 GV to ring Line 1 and Line 2 only when busy

Title: Obi20 GV to ring Line 1 and Line 2 only when busy
Post by: Volta10 on April 18, 2016, 08:33:08 PM

This is driving me crazy. I recently added a GV account into my Obi202 device. I want Line 1 to ring only unless it's in use then line 2 will ring.
I use this setting as instructed to me before:
Voice Services -> SP1 Service
InboundCallRoute: ph
CallForwardOnBusyEnable: checked
CallForwardOnBusyNumber: ph2

The crazy thing is whenever I hit submit CallForwardOnBusyEnable and CallForwardOnBusyNumber go back to obitalk settings. I'm going crazy. Somehow the settings won't save! I even tried to upgrade the firmware but no luck. Please help.

Title: Re: Obi20 GV to ring Line 1 and Line 2 only when busy
Post by: Taoman on April 19, 2016, 04:10:24 PM

Try again. It appears Obihai just fixed the problem with their Obitalk servers. Your config changes should now stick.

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: Volta10 on April 18, 2016, 08:33:08 PM