Hi, my phone system uses *98 to access voicemail by the press of a button. My OBi200/ANVEO setup uses *97 for that same function. I can't change my phone system access to voicemail so anybody knows how I can reconfigure my OBi200/ANVEO setup so *98 dials my voicemail?
Thanks.
So I tried that and it worked but is it the best way?
I set Speed Dials 2 to *97
I set Star Code Profile A Code28 to *98, Voice Mail, call($spd[2])
Unless you have transposed or mistyped the Speed Dial 2 code in your previous post, I have no idea why what you did actually worked. (I am presuming from your first post you need to dial << *98 >> to access your voicemail.) If that is the case, why not try the following:
Set Code 28 in Star Code Profile A to << *98, Voice Mail, call(**1*98#) >>.
If you only have SP1 active, you can optionally leave out the << **1 >>. And, of course, you'll lose the original *98 star code (Blind Transfer) unless you assign it elsewhere.
Good luck.
My ANDEO system requires *97 to access voicemail (without a password) but my phone dials *98 when I press its voicemail button. Hence why I've set speed dial 2 to *97 and set *98 to dial speed dial 2. It does work but requires one speed dial slot (although I have 99 of them so it' not really a waste).
I tried your method but switched to to line 2 and dialed *97 instead
*98, Voice Mail, call(**2*97#)
And it also works :-)
Thanks.