It all began with my Obi, configured directly with the use of this: http://www.obihai.com/itspConfiguration/itspConfiguration-googlevoice.html
At first everything worked perfectly, but then things got weird. The call would drop about a minute and a half in to the conversation. Sometimes when I picked up the phone, there would just be static and the call would drop. I figured this was a firmware issue, so I updated to the latest version. Now all I get is static when I try to dial a number or a call comes in.
I thought this might just be a GV issue, so I did a manual hard reset by unplugging everything but the power from the obi and using a paperclip to reset the device. I then set up call centric using this:
http://www.obihai.com/itspConfiguration/itspConfiguration-callcentric.html
And the same thing is happening.
I am on:
ModelName OBi100
HardwareVersion 2.8
SoftwareVersion 1.2.1 (Build: 2384)
Have you tried to use a different phone or replaced the telephone line? Also, when you experience the static, take a look at PHONE port status page, does it show normal 20 mA current, ~18 V VBAT, ~5 V TipRingVoltage?
State Off Hook
LoopCurrent 20 mA
VBAT 16 V
TipRingVoltage 5 V
LastCallerInfo --
It stays that way for about 3 seconds then the Obi reboots.
Yes, these are correct status when your phone port is off-hook. Your device seems to operate fine. We might need a further look at your device regarding the problem..
please contact us at support@obihai.com, we will help you from there, thanks,