Text only | Text with Images

OBiTALK Community

General Support => New to Using the OBi / VoIP => Topic started by: mfranks on October 13, 2016, 09:47:33 AM

Title: Need Help routing number to ports
Post by: mfranks on October 13, 2016, 09:47:33 AM
Hello I have a sip trunk configuration with two numbers  and I'm trying to see how to route each number to a different phone port. I have two phones and when I call those two numbers it just rings to one phone. I have a obi504vs
Title: Re: Need Help routing number to ports
Post by: drgeoff on October 13, 2016, 01:33:57 PM
You have the two numbers on different 'Voice Services'.  Each one has its own X_InboundCallRoute.  Ensure that one is set to ph and the other to ph2.  (Or whatever two physical phone ports you want to use.  ph is a short form of ph1.)
Title: Re: Need Help routing number to ports
Post by: mfranks on October 17, 2016, 07:10:25 AM
Thanks for the answer, but can you have more than one number on an SP. If so how do you route them to different ports. My server is skyswitch and I have two numbers going through one SIP Trunk. Would I have to create another sip trunk and attach that number to SP2
Title: Re: Need Help routing number to ports
Post by: drgeoff on October 17, 2016, 07:33:10 AM
One number per SPx under 'Voice Services'.  Configure 'Voice Services/SP2/SIP Credentials'' with the SIP registration details of the second number.  If it is the same provider as the first number you don't need to repeat the 'Service Providers' stuff. Just have SP2/X_ServProvProfile set to 'A'.
Text only | Text with Images