I continue to experience frequent up/down state changes on my Obihai 202+Anveo configuration
From Anveo Support: "I checked your current SIP status and it shows that your device is currently using about 35 seconds registration timeout (way too low). As a general note, SIP registration timeout should be configured to be around 180 seconds (not 35 seconds). "
What is the name of that parameter(SIP registration timeout) in the OBI Expert configuration? (I have Anveo on SIP A)
Service Providers >> ITSP Profile A >> SIP >> RegistrationPeriod: 360
Note that the OBi registers at half the RegistrationPeriod. So, to configure it to register every 180 seconds, set RegistrationPeriod to 360.