Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: bill-cary on March 27, 2017, 07:04:52 PM

Title: config OBI200 to fwd a call to an OBI100 when it is busy
Post by: bill-cary on March 27, 2017, 07:04:52 PM
I have an OBI200 and an OBI100 configured with GV#s. If the 200 is busy, can I configure it to fwd an incoming call to the 100 via the OBI number?
Title: Re: config OBI200 to fwd a call to an OBI100 when it is busy
Post by: azrobert on March 28, 2017, 07:05:45 AM
OBi200:
Physical Interfaces -> Phone1 Port->
CallWaitingEnable: unchecked
ForwardOnBusy: checked
ForwardOnBusyNumber: pp(200222222)

OBi100:
Voice Services -> OBiTalk Service -> InboundCallRoute: ph

Replace 200222222 with the OBi number of the destination OBi100
Use OBi Expert to make the above changes
The OBi200 must be on an active call, you can't just take it off-hook to test
Text only | Text with Images