Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: SteveStone on March 30, 2017, 01:25:30 PM

Title: Obi100 not receiving incoming calls in a multi OBI device setup with GV
Post by: SteveStone on March 30, 2017, 01:25:30 PM
one obi100, one obi200. The obi200 can receive calls, but not the obi100. Any ideas?
Title: Re: Obi100 not receiving incoming calls in a multi OBI device setup with GV
Post by: drgeoff on March 30, 2017, 03:17:09 PM
Yes that's the way it works with OBi1x0 devices.  Either replace the OBi100 with an OBi20x or only connect the OBi200 to GV and 'slave' the OBi100 to the 200 to make and receive GV calls through the 200.
Title: Re: Obi100 not receiving incoming calls in a multi OBI device setup with GV
Post by: SteveStone on March 30, 2017, 03:32:21 PM
Thank you for the reply. Then how to make the OBi1x0 a 'slave'?
Title: Re: Obi100 not receiving incoming calls in a multi OBI device setup with GV
Post by: SteveStone on March 30, 2017, 03:47:25 PM
After I put the two OBI devices into two different obitalk accounts, both devices ring when receiving calls now. I will test more to confirm it.
Text only | Text with Images