OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: thelobi on April 11, 2017, 05:59:42 PM

Title: OBI202 as an Asterisk extension
Post by: thelobi on April 11, 2017, 05:59:42 PM
I have OBi202 and trying to make it same way as Sipura, an Asterisk Extension.

The devices is registered with Asterisk and Line1 rings OK but I can not make any call via Asterisk, nor can I call any local extension.

In:
ITSP Profile A
DigitMap: (xx.|*xx.|#xx.)

In: PHONE1 Port
DigitMap:  (xx.|*xx.|#xx.)

What should I put in DigitMap?
Is there any "how to" for Astersik users?
Title: Re: OBI202 as an Asterisk extension
Post by: drgeoff on April 12, 2017, 12:38:07 AM
What exactly does happen when you try to make a call?

What does the 202's Call History show for the failed calls?

What is in the Phone1 OutboundCallRoute?

Look in the list of posts for this very section of the forum.  There is a sticky post with FreePBX in the title. Although it mentions an OBi110, the bits about using as extension can be applied to a 202.