Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: mew_atl on August 04, 2011, 04:00:28 AM

Title: OBi110 and &*98 for voice mail
Post by: mew_atl on August 04, 2011, 04:00:28 AM
I'm using voipvoip.com, and the code to get to Voice Mail is to dial *98.  When I do this from the OBi (**2*98) I get a fast busy.  Ideas on how to fix this?
Title: Re: OBi110 and &*98 for voice mail
Post by: RonR on August 04, 2011, 09:11:47 AM
Simply add a *98 rule to the beginning of the ITSPB DigitMap:

Service Providers -> ITSP Profile B -> General -> DigitMap : (*98|...)
Title: Re: OBi110 and &*98 for voice mail
Post by: mew_atl on August 04, 2011, 09:50:19 AM
Thank you!  I'm such a newbie I didn't know how to get this to "stick" and not get overwritten by ObiTalk, but I think I got it by setting to "Device Default" within ObiTalk and unchecking "Default" within the device configuration page before editing there.

Thank you again!
Text only | Text with Images