Hello, my config is the following:
OBI100 + PSTN + GV
Incoming call thru the PSTN then forward to GV with a number as SP1(xxxxxxxxx)
the functionality is good however I got the callerid of the GV not from the incoming PSTN call...
how do I do this ?
Thanks in advance.
Jerome
You don't. One cannot change the CID info of an outbound google voice call. If you want that capability you'll need to use a real voip provider that lets you control CID info. Callwithus is one that comes to mind. Others may allow this too.
You can pass CallerID via SIP routing to a cell phone or a computer. Install a softphone on the device, register it to a free SIP provider and route the call via SIP URi. You need an SIP trunk defined on the OBi110 or define a dummy SIP trunk.