RonR just helped me with an initial dial plan (thanks), and I saw another older thread from a user needing to configure for the Spanish national line/PSTN standard. I'd very much appreciate it if someone knows the settings for Holland. I have a working SPA3000, but I set that up through trial-and-error many years ago. If someone knows what works for the OBi, or has a link to the national PSTN standards for Holland I would appreciate it.
Thanks in advance.
Hi,
Please contact Obihai support at support@obihai.com, and state your 9-digit OBi number in the email, we like to assist you for the device setup in Holland.
Thanks,
Hi BigJake, OBiSupport,
Can you share the specific settings for the LINE and PHONE port applicable for the Netherlands? I'm about to ship an OBi110 and would like to have it configured correctly before my parents lose their land-line service or rack up high bills because the line doesn't get disconnected.
Thanks!
Huib
This worked for me:
Country related settings (Holland)
Physical Interface -- PHONE port
Impedance 270+(750||150 nF)
Physical Interface -- Line port
RingFrequencyMin 10
RingFrequencyMax 100
RingThreshold 13.50-16.50
RingValidationTime 256
ACImpedance 270+(750||150 nF) and
275+(780||150 nF)
DisconnectTonePattern 425-30;10;(.25+.25)
OnHookSpeed 3 ms (ETSI)
MinOperationalLoopCurrent 12 mA
CurrentLimitingEnable Enable
CallerIDDetectMethod FSK(V.23)
Tone Profile - B
Dial tone 425-18;20
Ringback tone 425-18;-1;(1+4)
Howling tone 425-3;10;(.25+.25)
Busy tone 425-18;10;(.5+.5)
Reorder tone 425-18;10;(.25+.25)
Ring Profile - B
Ring pattern 1 60;(1+4)
Awesome! Thanks for the quick reply :)