OBiTALK Community

General Support => Day-to-Day Use => Topic started by: CLTGreg on June 21, 2018, 03:27:55 PM

Title: A very bad day. Scrambled 202
Post by: CLTGreg on June 21, 2018, 03:27:55 PM
                                                            Phone 1            Phone 2
Primary Line for Outgoing Calls Route to:    SP1                     SP3
Phone Rings on Incoming Calls from:            SP2,PSTN     SP1,SP3,BT
Voicemail Notification Alert from:        
Emergency Service Call Routes to:            SP2                     SP2

Firm: 3.2.2 (Build: 5859EX)

SP1: Google Voice in SIP format (@obihai.sip.google.com) (nickname 704)
SP2: Anveo but not until yesterday (nickname 910)
SP3: Another Google Voice (nickname 980)

For this tiny bit of my overall misery the outbound calls when I select line 2 are going out SP2 which you can see is not listed for outbound calls at all. **3 does force calls out SP3.

So, if this isn't caused by a possession it would seem that I've made some custom changes but I don't remember where or where to look.

Title: Re: A very bad day. Scrambled 202
Post by: CLTGreg on June 21, 2018, 03:33:37 PM
Also, if I dial out through line 2 (outbound incorrect through SP2) I get no rings on SP1 but I do get a miss call alert from Google Voice.