Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: bill-cary on July 27, 2018, 10:58:03 AM

Title: CallerID configuration
Post by: bill-cary on July 27, 2018, 10:58:03 AM
I have an OBI100 calling thru an OBI200 via OBITALK.
I have SP4 on the OBI200 set to route inbound calls for that number to the 100.
When I dial out on the 100 it goes thru SP1 on the 200.
How do I set the 100 calls to go thru SP4 and associated caller ID?
Text only | Text with Images