General Support => Installation and Set-Up (Devices) => Topic started by: bill-cary on July 27, 2018, 11:02:00 AM
Title: callerID/routing issue
Post by: bill-cary on July 27, 2018, 11:02:00 AM
I have outbound calls on an OBI100 going via OBITALK to an OBI200. These calls are going out on SP1 m== with that CID# I have SP4 on the 200 routing inbound calls to the OBI100 SP1. How do I make the OBI100 calls go thru SP4 with associated CID#?