Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: bill-cary on July 27, 2018, 11:03:23 AM

Title: OBITALK callerID/routing issue
Post by: bill-cary on July 27, 2018, 11:03:23 AM
I have outbound calls on an OBI100 going via OBITALK to an OBI200.
These calls are going out on SP1 m== with that CID#
I have SP4 on the 200 routing inbound calls to the OBI100 SP1.
How do I make the OBI100 calls go thru SP4 with associated CID#?
Title: Re: OBITALK callerID/routing issue
Post by: drgeoff on July 27, 2018, 11:14:37 AM
Not all ITSPs honour the spoofed CID number forwarded to them in a call set up request. Is that the real problem you are facing?
Title: Re: OBITALK callerID/routing issue
Post by: azrobert on July 27, 2018, 11:24:46 AM
OBi200
Service Providers -> ITSP Profile D -> SIP -> X_SpoofCallerID: Checked
Text only | Text with Images