OBiTALK Community

General Support => Day-to-Day Use => Topic started by: wildbilll on September 14, 2011, 01:06:36 PM

Title: Connect 5 remote Obi100's to one central Obi100's GV account
Post by: wildbilll on September 14, 2011, 01:06:36 PM
I am trying to set 5 remote Obi100's to connect to a 6th Obi100 that would make a call out. Each remote Obi100 is at a different location.
I want each of the 5 remotes to get a dialtone that, when any one of them go off hook to dial, would cause the 6th Obi100 to actually call out on the GV service.
Is this possible? My goal is to make the call from any of the 5 remote Obi100's to always appear to come from the 6th Obi100.
Thanks in advance.
Title: Re: Connect 5 remote Obi100's to one central Obi100's GV account
Post by: RonR on September 14, 2011, 01:11:07 PM
Quote from: wildbilll on September 14, 2011, 01:06:36 PM
I want each of the 5 remotes to get a dialtone that, when any one of them go off hook to dial, would cause the 6th Obi100 to actually call out on the GV service.

You want the 5 remotes to 'hot-dial' a particular number as soon as they go off-hook?

Or you want the calls dialed from the 5 remotes to simply/tranparently go the the 6th OBi and be dialed out through its Google Voice (SP1?) trunk?
Title: Re: Connect 5 remote Obi100's to one central Obi100's GV account
Post by: wildbilll on September 14, 2011, 01:13:43 PM
I want the calls dialed from the 5 remotes to simply/tranparently go the the 6th OBi and be dialed out through its Google Voice (SP1?) trunk.
Title: Re: Connect 5 remote Obi100's to one central Obi100's GV account
Post by: RonR on September 14, 2011, 01:27:44 PM
OBi 1-5:

Physical Interfaces -> PHONE Port -> DigitMap:

([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|<2*>(Mpli))

Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service

User Settings -> Speed Dials -> 2 : PP(ob200000006)

where 200000006 is the OBiTALK number of OBi 6.



OBi 6:

Voice Services -> OBiTALK Service -> InboundCallRoute:

{(200000001|200000002|200000003|200000004|200000005)>(Msp1):sp1},{ph}

where 200000001|200000002|200000003|200000004|200000005 are the OBiTALK numbers of OBi's 1-5.

Voice Services -> OBiTALK Service -> MaxSessions : 4



NOTE: Four simulataneous ougoing calls is the limit because the OBi is limited to four bridges.  Four simultaneous outgoing calls are possible if you configure two Google Voice accounts (SP1 + SP2), set PrimaryLine to Trunk Group 1, and change 'sp1' in the InboundCallRoute above (2 places) to 'tg1'.
Title: Re: Connect 5 remote Obi100's to one central Obi100's GV account
Post by: wildbilll on September 14, 2011, 01:30:01 PM
The calls don't have to be able to be simultaneous. One at a time is OK. Would they other Obi get a busy tone?
Title: Re: Connect 5 remote Obi100's to one central Obi100's GV account
Post by: RonR on September 14, 2011, 01:34:03 PM
With one Google Voice account on SP1, two simultanous calls can be handled.

With two Google Voice accounts (on SP1 + SP2), four simultaneous calls can be handled.

If they're all used up, the caller will get a busy.
Title: Re: Connect 5 remote Obi100's to one central Obi100's GV account
Post by: wildbilll on September 14, 2011, 01:35:01 PM
Thanks Ron