I'm setting up an obi202. I've got GV working on sp1, which is routed to sp3. That works.
We also have an analog phones that I'd like to connect to a PSTN port, and have an incoming GV call route to sp3 and ring the analog phone. How can I do this ?
Thanks for any help.
Did you do the following to route calls to SP3?
Voice Services -> SP1 Service -> X_InboundCallRoute: sp3
If that is what you did, change it to: sp3,ph
Thanks for the quick response.
Yes. sp3(mygvnumber). (Do I need to include my gv number ?)
So I'd change that to "sp3(mygvnumber),ph" ?
Does that ring both tel ports ? Can I use ph1 or ph2 to route to a specific port ?
Quote from: seandarcy on February 14, 2019, 07:25:30 AM
So I'd change that to "sp3(mygvnumber),ph" ?
Correct.
To ring both phone ports:
sp3(mygvnumber),ph,ph2
ph and ph1 both point to Phone1.
Maybe it's already done ???
From the Dashboard -> Device Configuration SP1:
SP1: Google Voice - OBi202
Configuration Name GV-<my number>
Primary Line for Outgoing Calls [check] Phone 1 [ ] Phone 2
Incoming Calls Will Ring On [check] Phone 1 [ ] Phone 2
I may not need to change X_InboundCallRoute
I'll check it out.