Print Page - Fork calls from OBi2182 to OBi200 and still keep NoMoRobo working

Title: Fork calls from OBi2182 to OBi200 and still keep NoMoRobo working
Post by: N7AS on May 08, 2019, 08:06:24 PM

I have been trying to fork inbound calls from SP1 on my OBi2182 IP Phone to my OBi200. It never fails that sometimes I am not at my desk, and if I am expecting a call, i am not there. I want to be able to take the call on the cordless phone connected to my OBi200.
I have tried different methods using my 9 digit OBiTalk number. I also use NOMoRobo that works ok.

X_InboundCallRoute: ph,sp1(1877xxxxxxx@tollfree.alcazarnetworks.com;ui=$1) works

To add forking to my OBi200

I changed it to: {pp(ob510xxxxxx),ph},sp1(1877xxxxxxx@tollfree.alcazarnetworks.com;ui=$1)

Didn't work.

I tried a few more variations, but none of them worked. It's probably right in front of me and don't see it.

I also would like it to pass CallerID to the OBi200.

Title: Re: Fork calls from OBi2182 to OBi200 and still keep NoMoRobo working
Post by: azrobert on May 08, 2019, 08:14:04 PM

{pp(ob510xxxxxx),ph,sp1(1877xxxxxxx@tollfree.alcazarnetworks.com;ui=$1)}

Title: Re: Fork calls from OBi2182 to OBi200 and still keep NoMoRobo working
Post by: N7AS on May 08, 2019, 09:19:48 PM

It rang both phones, but no audio either way.

I checked Call History...

From '928xxxxxxx' SP1(928xxxxxxx) Fork to:
PP1(ob510xxxxxx)
PH1

SP1(1877xxxxxxx@tollfree.alcazarnetworks.com;ui=928xxxxxxx)
       Ringing (PH1)
       Ringing
(SP1(1877xxxxxxx@tollfree.alcazarnetworks.com;ui=9285837971))
Call Failed (486 Busy Here;
Call Connected (PP1(ob510xxxxxx))
     Call Ended

I wish Tabs would work so this would format properly...

Title: Re: Fork calls from OBi2182 to OBi200 and still keep NoMoRobo working
Post by: zsak23 on May 09, 2019, 01:53:32 AM

Quote from: N7AS on May 08, 2019, 09:19:48 PM
I wish Tabs would work so this would format properly...

Use Insert Code. it's the # symbol on the second row third from the right

OBiTALK Community

General Support => Day-to-Day Use => Topic started by: N7AS on May 08, 2019, 08:06:24 PM