It was easy to setup Obitalk with google voice but .... when I place a call, it is placing the call twice! This is dang annoying ... any thoughts???
OBi Dashboard
SP1 Google Voice Connected
SP2 Not Configured
SP3 Not Configured
SP4 Not Configured
ObiTalk Google Voice Setup
Primary Line for Outgoing Phone 1 X Phone 2 not checked
Primary Line for Incoming Phone 1 X Phone 2 not checked
Google Voice Settings .... Devices
Web
Android Device
ObiTalk <<< only 1 ObiTalk device shows up so very confused how there could be 2 outbound calls
Any thoughts??
Whaaaat?
What do you mean? Describe exactly, in detail, how you are doing this.
@Steve ... that's what I have been thinking what .........
I have an analog phone connected to line 1 of a Obi202
Since I posted (I'm still having the problem) I have removed
- device from obitalk dashboard
- obitalk from google voice devices
I removed power from the obitalk
I powered on the obitalk
I clicked on add device on the obi dashboard
I dialed *5 xxxxx on the analog phone and waited to hear device had been registered
Not sure why I can't get the hyperlinks to work .. COPY THE COMPLETE LINK and open in a new tab
The Obi202 Dashboard device config looks like this
https://1drv.ms/u/s!AubqzVUT34yJgux8d164J6WWPN5jgA?e=fUb3gx
The Obi202 SP1 Config looks like this
https://1drv.ms/u/s!AubqzVUT34yJgux9k4mLrwY3H9JP9g?e=8Iu2JL
When I place an outbound call from the analog phone connected to Line 1 on the Obi202 ... It calls the number twice. For example ... if you call a cell phone you will get voicemail AND the phone will ring. If you call a number with a switch board, you can actually talk to two people .. BUT ... the people who answer your call can NOT hear each other. As in you dialed the number ONCE and it called twice. Really Weird!!!!!
I have logged into Google Voice and made an outbound call to a 10 digit number using the Web Calling ... it only calls the destination number Once. This leads me to think the duplicate calling is associated with the Obitalk.
Humph, that's very odd. I have never seen this symptom.
Try this easy test first: remove the checkmark on the SP1 configuration page, next to the option to use it with a security alarm line. Make a test call.
If that doesn't fix it, then I recommend completely clearing everything out, and starting over. It isn't that difficult. Here are my instructions: http://www.obitalk.com/forum/index.php?topic=13868.msg89076#msg89076 (http://www.obitalk.com/forum/index.php?topic=13868.msg89076#msg89076)