Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: cici235 on October 02, 2011, 08:27:16 AM

Title: Magic Jack Line in on Obi 110 not working.
Post by: cici235 on October 02, 2011, 08:27:16 AM
Before cutting loose my home land line. I tested the Obi110 with majic Jack and had no trouble getting it to work as a second line when dialing **8. Now no matter what I do I can't get the Obi to recognize it after plugging it into the line input on the back of the 110.

Any suggestions?
Title: Re: Magic Jack Line in on Obi 110 not working.
Post by: RonR on October 02, 2011, 10:00:53 AM
With the MagicJack connected and the LINE Port not in use, what values does the OBi display at?:

Status -> PHONE & LINE Status -> Line Port Status -> State

Status -> PHONE & LINE Status -> Line Port Status -> LoopCurrent

Status -> PHONE & LINE Status -> Line Port Status -> TipRingVoltage

What values does the OBi display after a # is entered from the OBi PHONE Port?  (Refresh the page.)

Can you successfully access the MagicJack from the OBi PHONE Port when power is removed from the OBi?
Text only | Text with Images