Print Page - Outgoing call block: all area codes but local?

Title: Outgoing call block: all area codes but local?
Post by: blueman2 on January 09, 2020, 12:02:25 PM

I am currently using call blocking for my elderly parents. I have {(Mblock):} in my outbound call route, and then list numbers in User Defined Digit Map named 'block'. Works fine, but only for specific numbers. I now want to block all area codes except for local one. Rather than adding a block for every area code there is, can I block all area codes except for 757? What would that format look like?

Would {@.[^757]xxxxxxx} do the trick in the User Defined Digit Map 'block'?

Title: Re: Outgoing call block: all area codes but local?
Post by: azrobert on January 10, 2020, 07:51:30 AM

Only route area code 757 and everything else will fail by default. Delete Mblock from the digit map and outbound route.

Change the ITSP Profile A DigitMap to:
(1757xxxxxxx|<1>757xxxxxxx|911)

Title: Re: Outgoing call block: all area codes but local?
Post by: blueman2 on January 10, 2020, 05:43:00 PM

Thanks! That is perfect.

Blueman2

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: blueman2 on January 09, 2020, 12:02:25 PM