Print Page - Connecting a Jabra 9450

Title: Connecting a Jabra 9450
Post by: justSteve on February 03, 2020, 02:37:40 PM

I've just hooked up a new 1032 and configured Google voice. Now I'm trying to connect my Jabra 9450 - but looks like it's not listed as a supported model. Am I out of luck or is there a way to do that? thx

Title: Re: Connecting a Jabra 9450
Post by: SteveInWA on February 03, 2020, 03:22:14 PM

I posted instructions on how to make this work, several years ago, but I am not going to try to find it.

Short answer: yes, it works fine. Longer answer: you need to buy two different adapter cables, which convert the Jabra Electronic Hook Switch (EHS) signals to the phone's EHS signals. Do you have those cables?

Title: Re: Connecting a Jabra 9450
Post by: SteveInWA on February 03, 2020, 03:27:49 PM

See: http://www.obitalk.com/forum/index.php?topic=12402.msg81029#msg81029 (http://www.obitalk.com/forum/index.php?topic=12402.msg81029#msg81029)

There is at least one other discussion on this subject, too.

Note: the Jabra 9450's connection and setup is identical to the 9470 referenced in my posts, except for the lack of the touch panel on the 9450.

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: justSteve on February 03, 2020, 02:37:40 PM