Print Page - OBItalk used on a protel modem for programming payphones

Title: OBItalk used on a protel modem for programming payphones
Post by: Bob1 on March 18, 2020, 05:41:32 AM

I have a Obi 200 and use it to program payphones threw a Protel modem witch is compatible
to a Hays modem. it works some time on some models. The problem I am experiencing is packet loss and data loss and modem dropping out. I have read changing Codecs-ITU G.711 May Help and making it priority. I would like to know how to do this and if their is more I can do to improve my device.
Thank You for any assistance in advance.
Bob Statler

Title: Re: OBItalk used on a protel modem for programming payphones
Post by: drgeoff on March 18, 2020, 05:59:14 AM

Please do not post the same question more than once.

The default codec is already G.711. That is the standard u-Law or A-Law telephony codec used on telco trunks.

You did not say which Internet Telephony Service Provider you are using. That could be relevant.

Title: Re: OBItalk used on a protel modem for programming payphones
Post by: Bob1 on March 18, 2020, 03:01:14 PM

Google Voice is what I am using my Obi 2000 with any work around to get better results from my modem

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: Bob1 on March 18, 2020, 05:41:32 AM