Print Page - Making SP2 default for outgoing calls (Obi 202)

Title: Making SP2 default for outgoing calls (Obi 202)
Post by: bebphone on April 07, 2020, 01:33:03 PM

My obi calls out on SP1 as default, despite setting the default to SP2.

Setup:

3 different accounts (PhonePower), SP1, SP2, SP3
Dialing **1, **2, **3 will call out on SP1, SP2, SP3 (Verified with callerid calling a different number).
Primary line for outgoing calls route to: SP2 (both for phone 2 and 2). However, if I don't use a prefix, the call goes out on SP1, not SP2. Again verified with callerid.

Did I miss something in the configuration setup?

Thanks for all help!

Title: Re: Making SP2 default for outgoing calls (Obi 202)
Post by: drgeoff on April 07, 2020, 03:09:46 PM

1. Please delete the other identical copies of your post asap to try to avoid the discussion being split across multiple places.

2. How are you setting the Primary Line?

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: bebphone on April 07, 2020, 01:33:03 PM