Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: ctvi on April 19, 2020, 06:54:03 AM

Title: Import configuration from device to obitalk.com web page
Post by: ctvi on April 19, 2020, 06:54:03 AM
I configured my device by programming it up locally with the local ip address.
I want to import the configuration to the obitalk portal.
How can I do that?
The obitalk.com web page does not show my configuration from my device.
Title: Re: Import configuration from device to obitalk.com web page
Post by: drgeoff on April 19, 2020, 03:54:04 PM
Like this.
Title: Re: Import configuration from device to obitalk.com web page
Post by: ctvi on June 21, 2020, 07:03:45 AM
I presume  that I back it up and then import it to web as you showed above.
Now the next step is, I want to over ride the local configuration from the web portal online to the local device.  I dont want to program it up locally anymore.  What is the next step?
Title: Re: Import configuration from device to obitalk.com web page
Post by: drgeoff on June 21, 2020, 11:48:11 AM
Quote from: ctvi on June 21, 2020, 07:03:45 AM
I presume  that I back it up and then import it to web as you showed above.
Now the next step is, I want to over ride the local configuration from the web portal online to the local device.  I dont want to program it up locally anymore.  What is the next step?
Enable Obitalk Provisioning. Log in locally, go to System Management, Auto Provisioning page, Obitalk Provisioning section. Change Method from Disabled to System Start.
Text only | Text with Images