Print Page - flashing green/red obi 200, update firmware doesn't fix

Title: flashing green/red obi 200, update firmware doesn't fix
Post by: bluenote on January 21, 2021, 03:43:38 PM

Hey guys
My Obi 200 flashes green red. When I browse to it, it goes straight to the update firmware page. I downloaded the 2019 fw from the forums, and afterwards it just does the same thing. Any suggestions? Is this a brick now?
thx

Btw, my pap2t that the obi replaced, still works ...

Title: Re: flashing green/red obi 200, update firmware doesn't fix
Post by: Cerda on January 24, 2021, 09:38:56 PM

I faced similar kind of issue last time, I am still searching for some proper solution Same issue still no fix to this.

ACES ETM (https://www.acesetm.biz/)

Title: Re: flashing green/red obi 200, update firmware doesn't fix
Post by: Sheffield_Steve on January 25, 2021, 05:19:08 AM

It's not bricked. Go here and click on the "Alternating Red/green" icon

https://www.obitalk.com/info/support/troubleshooting (https://www.obitalk.com/info/support/troubleshooting)

OBiTALK Community

General Support => On-Topic: Obihai and OBi Products => Topic started by: bluenote on January 21, 2021, 03:43:38 PM