Print Page - OBi110 to phone volume too high!

Title: OBi110 to phone volume too high!
Post by: Sanjuro on October 28, 2011, 12:00:52 AM

I just set up my OBi110 with GV and it works great. However the call volume coming out of the phone is crazy loud, even after I went into advanced settings and set ChannelTxGain to -12 for the PHONE port. Any other places I can tweak to make the OBi to phone volume lower?

Title: Re: OBi110 to phone volume too high!
Post by: LeftRight on November 02, 2011, 02:52:11 PM

Phone Port "ChannelTxGain" is really the only place for you to adjust the volume, if that does not make much difference to you (any difference?), you may consider using a different analog phone for a try ...

Title: Re: OBi110 to phone volume too high!
Post by: Sanjuro on November 03, 2011, 10:16:11 AM

Thanks LeftRight. It does make a difference, but I discovered the true cause of the problem:

My Polycom Soundstation 2 apparently has been known for its massive volume. I tried it on another phone and the volume was ok. Solution resulted in keeping ChannelTxGain at -12 and putting a mug over the conference phone.

OBiTALK Community

General Support => Day-to-Day Use => Topic started by: Sanjuro on October 28, 2011, 12:00:52 AM