Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: iianev on October 30, 2011, 08:33:17 PM

Title: Obi110 - no response from PennyTel on SP1
Post by: iianev on October 30, 2011, 08:33:17 PM
I have configured SP1 to PennyTel (sip.pennytel.com) and SP2 to 12voip (sip.12voip.com).
Both register fine and I can make outgoing calls via SP2 (12voip) but not via SP1 (pennytel).

The difference I can notice (in the call status) is in the Peer RTP Address -
SP2 (12voip) lists a valid address, while SP1 lists 0.0.0.0

After I timeout, I get the Obi message that the SP did not respond.

I can call make outgoing pennytel calls using a generic softphone, so it does not seem to be my router.

Any addvise what I am setting wrong?

ITSP A config:
ProxyServer: sip.pennytel.com
RegistrarServer: sip.pennytel.com
UserAgentDomain: sip.pennytel.com
OutboundProxy: sip.pennytel.com
(all others default)

SP1 Config:
X_ServProvProfile: A
AuthUserName: my pennytel number
AuthPassword: my pwd
















Title: Re: Obi110 - no response from PennyTel on SP1
Post by: Stewart on October 31, 2011, 06:17:45 AM
Try changing X_UserAgentPort for SP1 from 5060 to 5070.

If no luck, report make/model of modem, separate router (if any) and any special settings (port forwards, etc.)
Text only | Text with Images