Print Page - Line out and dialing with **8

Title: Line out and dialing with **8
Post by: Jen_UK on November 15, 2011, 06:18:47 AM

Can anyone help me avoid dialing **8 before dialing local numbers in London. I have GV set to SP1. Any ideas. Thanks

Title: Re: Line out and dialing with **8
Post by: RonR on November 15, 2011, 09:03:39 AM

Quote from: Jen_UK on November 15, 2011, 06:18:47 AM
Can anyone help me avoid dialing **8 before dialing local numbers in London. I have GV set to SP1. Any ideas. Thanks

If you set:

Physical Interfaces -> PHONE Port -> PrimaryLine : PSTN Line

calls will go out the LINE Port by default and you can use **1 to redirect calls to SP1.

Title: Re: Line out and dialing with **8
Post by: Jen_UK on November 16, 2011, 07:48:58 AM

Ron,

Thanks for the info but Im not sure what and how to implement this.... forgive me a newbie here

Title: Re: Line out and dialing with **8
Post by: RonR on November 16, 2011, 09:15:20 AM

Log into the OBi at the IP address returned by dialing ***1. Username/Password is admin/admin unless changed on the OBiTALK Web Portal.

Use the navigation tree on the left side to find and set:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled

Physical Interfaces -> PHONE Port -> PrimaryLine : PSTN Line

Remember to click Submit at the bottom of any page where changes have been made before leaving that page.

When all changes have been made, click Reboot in upper right corner to make all changes effective.

Title: Re: Line out and dialing with **8
Post by: Jen_UK on November 16, 2011, 12:09:01 PM

Thanks. I'll do that as soon as I get home

OBiTALK Community

General Support => Day-to-Day Use => Topic started by: Jen_UK on November 15, 2011, 06:18:47 AM