Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: Viajerozz on December 02, 2011, 04:33:04 PM

Title: How do I switch between SP1 and SP2?
Post by: Viajerozz on December 02, 2011, 04:33:04 PM
Sorry for the newbie question but I am trying to figure out this great device. I have Obi100 which I managed to figure out is capable of using two VOIP services. Hence, I am using Google Voice as SP1 and want to configure CallCentric as SP2. I figured out, I think, how to do that but am wondering, when it is all configured, how will I be able to switch beteen the two VOIP services? Thanks for any help!
Title: Re: How do I switch between SP1 and SP2?
Post by: Stewart on December 02, 2011, 05:10:27 PM
By default, incoming calls from either service will come to your phone.  Outgoing calls will use whichever service you set as Primary Line for the Phone port.  You can override that by dialing **1 before the number to use SP1, or **2 before the number to use SP2.

You can modify the configuration to automatically select a provider based on the number called, e.g. so calls to 911 or to a specific country will go out on Callcentric.  There are lots of examples on this forum.
Title: Re: How do I switch between SP1 and SP2?
Post by: Viajerozz on December 02, 2011, 05:34:45 PM
Excellent help, thank you!
Text only | Text with Images