OBiTALK Community

To get to Expert Configuration, I used to click on a device in my dashboard and then see the option to enter expert mode on the bottom. I can still see that for some old broken devices in my dashboard,
old_offline_device.png

but any of the devices I still use are missing all those links.
current_device.png


I also tried to "Enable OBi Expert Entry from Dashboard" in my Obitalk profile, but it only shows up for a couple of old offline obi100 series devices.
dashboard_view.png   

How can I get to the expert configuration?

thanks

Quote from: aronroth on January 29, 2024, 06:55:22 PMHow can I get to the expert configuration?

Did you really not see the EOL notice (https://www.obitalk.com/info/products/obi200) for the OBi2xx series of ATAs?

You can't use expert configuration. You can only configure your OBi 200s manually via the local IP address and the OBi's web interface.

Quote from: Taoman on January 29, 2024, 07:27:54 PM

Quote from: aronroth on January 29, 2024, 06:55:22 PMHow can I get to the expert configuration?

Did you really not see the EOL notice (https://www.obitalk.com/info/products/obi200) for the OBi2xx series of ATAs?

You can't use expert configuration. You can only configure your OBi 200s manually via the local IP address and the OBi's web interface.

Yet he took sure care to crop that part from the screenshot!