Print Page - Inbound call divert 1 number

Title: Inbound call divert 1 number
Post by: mrjoe on December 21, 2011, 09:07:50 AM

Hi I'm trying to divert calls coming in from the PSTN Line from 1 particular Caller ID to a US number through Google Voice, all other calls to ring the Phone.

I have put this in the Inbound call route of the Line Port.
{05????????>(1??????????):SP2},{ph}

? Denotes a particular digit

When I try it, the phone rings.
What am I doing wrong?

Thanks

Title: Re: Inbound call divert 1 number
Post by: RonR on December 21, 2011, 09:44:15 AM

Physical Interfaces -> LINE Port -> InboundCallRoute : {0512345678:sp2(12341234567)},{ph}

Title: Re: Inbound call divert 1 number
Post by: mrjoe on December 21, 2011, 10:37:55 AM

Thanks very much RonR.
Works great!

One more thing if you don't mind before you go...

At the moment for my Wife to transfer calls to my Cell, she has to:
Press Recall, listen for the Dial tone, Dial *98, listen for the dial tone, then dial 9# which is the speed dial for my Cell.

Is there any easier way to do it?

Thanks

Title: Re: Inbound call divert 1 number
Post by: RonR on December 21, 2011, 10:55:12 AM

Quote from: mrjoe on December 21, 2011, 10:37:55 AM
Press Recall, listen for the Dial tone, Dial *98, listen for the dial tone, then dial 9# which is the speed dial for my Cell.

I assume you meant : Hook-Flash -> dialtone -> *98 -> Speed Dial

Quote from: mrjoe on December 21, 2011, 10:37:55 AM
Is there any easier way to do it?

I don't think so. That's a blind-transfer and couldn't get much easier. :)

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: mrjoe on December 21, 2011, 09:07:50 AM