I have tried a Hard reset but it is still flashing and not giving me an IP address.
I tried giving it one manually over the phone but it didn't do anything.
Please help me..
Thanks
If you're getting dialtone, try resetting it to factory defaults : ***8
Got it working, thanks very much.
Whenever I restore settings it users "default Password" for both SPs for some reason and I have to change them otherwise it shows and Authentication error.
Do you know what I can do to make My FREETALK® Connect•Me (http://www.skype.com/intl/en-us/get-skype/home-phone/phone-adapter/) to recognise DTMF from my Obi110 through the FXO?
It will not recognise my calls and puts me straight through to its own FXO!
If I attach a phone to it however it is fine!!
Quote from: mrjoe on January 07, 2012, 12:02:18 PM
Whenever I restore settings it users "default Password" for both SPs for some reason and I have to change them otherwise it shows and Authentication error.
If you're restoring settings from a backup file, that's normal. Passwords are not saved in a backup file and must be restored manually.
Quote from: mrjoe on January 07, 2012, 12:02:18 PM
Do you know what I can do to make My FREETALK Connect•Me® (http://www.skype.com/intl/en-us/get-skype/home-phone/phone-adapter/) to recognise DTMF from my Obi110 through the FXO?
Sorry, I'm not familiar with that device.
Quote from: mrjoe on January 07, 2012, 12:02:18 PMDo you know what I can do to make My FREETALK® Connect•Me (http://www.skype.com/intl/en-us/get-skype/home-phone/phone-adapter/) to recognise DTMF from my Obi110 through the FXO?
Try picking up the phone attached to the OBi and dialing #. You should hear dial tone from the Skype adapter and should then be able to dial a Skype call.
Are you using the Skype adapter to call PSTN numbers? If so, there may be less expensive and/or better quality choices. Please post what countries you are calling, whether landlines or cellular, approximate usage.