Is it possible to disable inbound calls (or not have those calls sent to the attached phone) coming in on the Line/FXO port? I want to retain the land-line on the FXO port for outbound 911 on (yes I know I can get E911 through other providers), but I don't want inbound calls to that number to ring the phone.
Thanks in advance.
Physical Interfaces -> LINE Port -> InboundCallRoute : {}
I changed the value from "ph" to "{}", hit submit, then reboot. It seemed to work briefly, then upon testing it would ring through again. I went back into the config and see that it is back to "ph" again.
SIP1 is Google Voice. No SIP2. Qwest/CenturyLink on Line port.
Sorry - I am an OBI newbie. Am I missing a step? Is there some other save step I need to perform? I have done it repeatedly and it always reverts back to "ph".
If you're configuring the OBi directly, you must also set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Otherwise, the OBiTALK Web Portal will keep overwriting your changes with its settings.
Awesome, thanks!
1. I had set up the initial GV config via the OBI web site (not local web interface). I didn't realize there was an expert config on the web site, so I assumed I had to use the local web interface.
2. I went ahead and make the change you gave me via the web site and it works great now!
Thank you!
I am blown away by this device. I have two. One with two GV accounts (two kids lines) and one for the parents GV with the land-line backup/911. Eventually like to drop the land-line, but the wife won't buy into eliminating the old reliable POTS with 911. Just dropped it to basic line only, no features (cheapest).
Thanks again!