Okay...I have SP1 setup with a standard SIP account and it works perfectly. I used the guide from voxilla.com (option 7B) to setup GV on SP2 not sure what I'm doing wrong but under OBi110 status is displays "Register Failed: 400" not sure if I need to change the port that is used I'm using the default 5060 for SP1 does SP2 need a different port?
Any help would be appreciated
Thanks
Assuming you are using SIP1/ITSPA for your SIP provider and want to add Google Voice on SP2, set all options to default on:
Service Providers -> ITSP Profile B -> (General, SIP, and RTP)
Voice Services -> SP2 Service
Then change only the following:
Service Providers -> ITSP Profile B -> General -> Signalling Protocol : Google Voice
Voice Services -> SP2 Service -> X_ServProvProfile : B
Voice Services -> SP2 Service -> AuthUserName : [your Google Voice Username]
Voice Services -> SP2 Service -> AuthPassword : [your Google Voice Password]
@RonR
Thanks that worked perfectly!!! The only step I missed was...
Service Providers -> ITSP Profile B -> General -> Signalling Protocol : Google Voice
I didn't change it to B
Thanks again.