Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: dash on January 23, 2012, 03:23:19 AM

Title: Resolved:How to remove AA from Obihai to Obihai call
Post by: dash on January 23, 2012, 03:23:19 AM
I purchased 12 OBIHAI devices and intend to deploy branches in world wide.

Only problem, I am facing is hassle of Auto Attendance for Obihai to Obihai calls.

Thanks to Ron and Steward, I connected PABX and use single stage dialing.

However, when dialing other Obihai, I have to dial 20# after that hear auto attendant then press 1 to talk to that Obihai device.

Please let me know so that when I dial 20#, it rings phone of that Obihai device.

Title: Re: How to remove AA from Obihai to Obihai call
Post by: RonR on January 23, 2012, 05:49:26 AM
Remove the following rule from your OBiTALK Service InboundCallRoute : {200123456:aa}
Title: Re: How to remove AA from Obihai to Obihai call
Post by: dash on January 25, 2012, 08:28:57 AM
Dear Ron R,

Thanks again for your quick response.
it works great!
Text only | Text with Images