Text only | Text with Images

OBiTALK Community

General Support => Day-to-Day Use => Topic started by: xanatos on January 31, 2012, 08:25:55 PM

Title: how to switch between 2 GV lines?
Post by: xanatos on January 31, 2012, 08:25:55 PM
I have 2 google voice lines set up on my obitalk.
Sometimes when I am talking on one of the lines, I can hear some sounds that indicate someone has called the other line. When this happens, how do I switch to the other line?
Title: Re: how to switch between 2 GV lines?
Post by: RonR on January 31, 2012, 08:27:51 PM
If you get a Call Waiting signal while talking on one trunk, simply push the FLASH button on your phone or briefly depress and release the hook-switch.
Title: Re: how to switch between 2 GV lines?
Post by: xanatos on January 31, 2012, 08:29:57 PM
hi, I tried press flash but it did not switch to the other line, so that's why I posted my question.
Isn't flash only supposed to work in the case where someone calls the same line that you are already on?

My case is different, because I am talking on GV line 1, and someone is calling GV line 2, which is a completely different number.
Title: Re: how to switch between 2 GV lines?
Post by: RonR on January 31, 2012, 08:39:27 PM
It should work under all circumstances (it does here).
Text only | Text with Images