Print Page - Cannot access OBi110 IP address

Title: Cannot access OBi110 IP address
Post by: baby007 on February 01, 2012, 11:53:06 AM

Hi, If I plug in everything for obi (ethernet port,phone port, line port), I can use the IP got from ***1 to access the obi. If I only plug in ethernet, the browser cant find the obi anymore(I did double check the IP) although I can still ping to it.When I use the Obi Web Portal, if only the ethernet is pluged in, the status on tha main windows is Offline. I still remember I cant still access obi IP just by plug in the ethernet and the status is Green (online). This issue happen after I upgrade to 1.3.0(2675).
Please help
Thanks

Title: Re: Cannot access OBi110 IP address
Post by: RonR on February 01, 2012, 12:08:46 PM

That's bizarre. I updated to 1.3.0 (Build: 2675) and I don't have any problems accessing the OBi after unplugging the PHONE Port and/or LINE Port.

Have you tried rebooting the OBi? If that doesn't help, you might try resetting the OBi to factory defaults and reconfiguring it.

Title: Re: Cannot access OBi110 IP address
Post by: baby007 on February 01, 2012, 11:11:00 PM

I know. Just did a reset and its fine now. Thats kind of weird.
Thanks for you help ;D

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: baby007 on February 01, 2012, 11:53:06 AM