Quote
Browse to Service Providers -> ITSP Profile B -> General and enable X_SymmetricRTPEnable. If that doesn't solve your problem, you may need to forward UDP ports 16800 through 16999 from your router to the OBi.
Also, given that Anveo use DNS SRV, it's nonsensical to explicitly specify their proxy server host and port. Under Service Providers -> ITSP Profile B -> SIP, just set ProxyServer to "anveo.com" (NOT "sip.anveo.com"), and check Default for everything from ProxyServerPort through OutboundProxyPort. Enable X_DnsSrvAutoPrefix, and optionally (not really useful for now, since Anveo's DNS SRV records only map to a single proxy server) X_ProxyServerRedundancy and ( X_SecondaryRegistration - added by me).
SP2 Service Status Parameter Name Value Status Registered (server=72.9.149.69:5010; expire in 32s) PrimaryProxyServer 72.9.149.69:5010 SecondaryProxyServer 67.212.84.21:5010 CallState 0 Active Calls |
Quote from: RonR on February 08, 2012, 11:37:15 AM
Verify the following settings in your OBi:
Service Providers -> ITSP Profile B -> General -> Name : Anveo
Service Providers -> ITSP Profile B -> SIP -> ProxyServer : sip.anveo.com
Service Providers -> ITSP Profile B -> SIP -> ProxyServerPort : 5010
Voice Services -> SP2 Service -> X_ServProvProfile : B
Voice Services -> SP2 Service -> AuthUserName : (sip username)
Voice Services -> SP2 Service -> AuthPassword : (sip password)
Voice Services -> SP2 Service -> URI : (Default checked)
Voice Services -> SP2 Service -> CallerIDName : (callerid name)
If your router has a SIP ALG option, disable it.