I always program my OBis locally and never use the web portal.
I wanted to see if I could access my OBi110 remotely so I changed the port to 8080
System Management -> Device Admin -> Port : 8080
rebooted the Obi, forwarded port 8080 in my router to the Static IP of the Obi 192.168.1.45
Now I can't see the OBi either remotely or locally with the static IP.
Also, on the ObiTalk page both of my OBis status shows offline. But everything works. I just can't make any changes either locally or remotely. Any ideas?
Are you entering the address in your browser as?:
http://192.168.1.xxx:8080
Quote from: RonR on February 09, 2012, 06:19:54 PM
Are you entering the address in your browser as?:
http://192.168.1.xxx:8080
Yes
It works here.
Quote from: N7AS on February 09, 2012, 06:21:16 PM
Quote from: RonR on February 09, 2012, 06:19:54 PM
Are you entering the address in your browser as?:
http://192.168.1.xxx:8080
Yes
Try rebootingyour Router and Modem to see if that takes of the issue. It should work with 192.168.1.xxx:8080
I got it working once again. I tried a different browser and worked with port 8080 but not without it. I also tried it remotely, but got some server issues. I was able to put it back to port 80 once again. I just wanted to see if I could make it work as I don't really need thhis function at this time. Thanks for the help.