Print Page - How to dial the 2nd line without type **2

Title: How to dial the 2nd line without type **2
Post by: FredH on February 19, 2012, 10:41:56 AM

Hi,

I set up Line 1 with GV, and Line 2 with Nonoh.

But I do not want to use **2 for starting Line 2. In the past, I used "#" in SPA for Line 2, and I wanted to keep the same. How to do that?

For international calls with Nonoh (Line 2) to country code 886, I want to replace it with 0.

Overall, I want to translate "#0 123456789" to "**2 886 123456789". How can I do that.

Thanks.

Title: Re: How to dial the 2nd line without type **2
Post by: ProfTech on February 20, 2012, 09:30:59 AM

You didn't say if you are using Obi 100 or Obi 110. # is reserved in the 110 for reaching the PSTN line but this can be changed. Other settings would need to be modified but this would be the first question.

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: FredH on February 19, 2012, 10:41:56 AM