Can anyone give me a simple step by step on setting up toll free for SP2? I'm using google voice for SP1 and it's not working for toll free calls. I've read a couple of things but can't find a good "how to" on setting it up. BTW, if I set that up will it hose me if I want to set up 911?
Set this post:
http://www.obitalk.com/forum/index.php?topic=2357.msg15182#msg15182
If you don't have good results using proxy.ideasip.com, use tollfree.alcazarnetworks.com.
So this is going to be a dumb question, but how do I edit the fields in the expert area? I can't seem to edit them.
The quickest and easiest way to configure the OBi is to simply log into IP address returned by dialing ***1 and configure it directly. In order to do so, you will also need to set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
If you feel you must use the more diffiicult approach of using the OBiTALK Web Portal, the instructions can be found in this post : OBi Expert Configuration (Introduction) (http://www.obitalk.com/forum/index.php?topic=458.0)
Thanks, but I can't change anything (including the two setting you mentioned) via the web portal. Everything is grayed out or unselctable. Not sure what I am doing wrong.
Quote from: bainbridgematt on February 20, 2012, 03:41:50 PM
Thanks, but I can't change anything (including the two setting you mentioned) via the web portal. Everything is grayed out or unselctable. Not sure what I am doing wrong.
For a setting that is presently at its default value, you need to first uncheck the Default box for that setting. If that's not your issue, please post a screenshot or describe in detail, e.g. "The Default box is itself grayed out."
Edit: this was already posted by jimates in another thread.