Hi,
Just set up Obitalk 110 today and used with google voice. Works okay so far, but I am trying to set up speeddials IE, 411, 911, 311 but it won't let me. I can't figure it out. I went thru this thread.
http://www.obitalk.com/forum/index.php?topic=124.0
But it doesn't make any sense. I logged into the device itself. Went thru Service Providers, ITSP Profile A, General, changed the digitmap and configured the digitmap to:
(<411:18003733411>|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.)
Works okay, then I tried adding 911 and 311, but it doesn't seem to work. Anybody know how to do it? Thanks.
911 is a separate case from the rest. To have 12341234567 sent out SP1 when you dial 911:
Physical Interfaces -> PHONE Port -> OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<#:>):li},{(<911:12341234567>):sp1},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
For 311, 411, etc. on SP1:
Service Providers -> ITSP Profile A -> General -> DigitMap:
(<311:18005551212>|<411:18003733411>|<1aaa>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.)
where aaa is your local area code for 7-digit dialing.
Thanks. I will try that when I get home later tonight.
Tried it, except 911 because I don't want to call my local police station. 311 works fine, but 411, I got a disconnect signal.
Quote from: pug_ster on March 07, 2012, 04:16:57 PM
311 works fine, but 411, I got a disconnect signal.
311 and 411 work exactly the same way, substituting the number after the colon. I suspect you have a typo somewhere.