Hi,
I have voicemail on my PSTN line however recently OBI does not indicate that I have a voice mai ( No beeping on line) Also when I dial *99 to access it the voice mail the obi gives me a fast busy.
any help would be great.
If you want to be able to send *99 out your PSTN line, you will need to set:
Physical Interfaces -> LINE Port -> DigitMap : (*99|[2-9]11S0|[2-9]xxxxxx|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.)
what about the message indicator that i got a voicemail on the PSTN line ?
Quote from: Sunfiregt on March 07, 2012, 06:00:45 PM
what about the message indicator that i got a voicemail on the PSTN line ?
The OBi does not support VMWI on PSTN lines.
You can get PSTN line dialtone (in order to listen for a stutter dialtone) by dialing just #.
*99 did not work after your recommended change.. :(
Quote from: Sunfiregt on March 07, 2012, 06:07:35 PM
*99 did not work after your recommended change.. :(
Is your PrimaryLine set to PSTN LINE? If not, you would need to dial **8*99.
If your PrimaryLine is SP1 Service and you'd like *99 automatically redirected to the LINE Port, set:
Service Providers -> ITSP Profile A -> General -> DigitMap:
(<**8>*99|<1aaa>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.)
where aaa is your local area code for 7-digit dialing.
If you dial # and hear stutter dial tone (or not), you could of course dial *99 at that point, independent of any configuration in the OBi.