Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: bhdira on March 08, 2012, 01:35:22 AM

Title: Forward SP2 to Line
Post by: bhdira on March 08, 2012, 01:35:22 AM
I am looking for the best way to forward all calls received on SP2 directly to a preset number thru the line port. I am not using SP2 or the line port for any other purpose at all. How would you do it?
Thanks
Title: Re: Forward SP2 to Line
Post by: jimates on March 08, 2012, 01:51:23 AM
Voice Service -> SP2 Service -> X_InboundCallRoute = Li1(xxxxxxxxxxx)

xxxxxxxxx = the number you want the calls forwarded to. It has to be in the final format that is accepted on the line service.

This can be done from the Expert Configuration at the portal.  You will need to uncheck both boxes to the right, before you can edit the call route.
Text only | Text with Images