Print Page - Plugged in OBi100, no LED

Title: Plugged in OBi100, no LED
Post by: BrianJM on March 13, 2012, 10:59:31 AM

I just received my OBi100 and plugged it in but no LED lights up. I tried numerous outlets and resetting the device. Is it DOA?

Title: Re: Plugged in OBi100, no LED
Post by: RonR on March 13, 2012, 11:21:08 AM

Upon powering up an OBi100 with nothing connected to it, the left-most LED should be red and then turn to flashing green.

Title: Re: Plugged in OBi100, no LED
Post by: BrianJM on March 13, 2012, 11:33:55 AM

Quote from: RonR on March 13, 2012, 11:21:08 AM
Upon powering up an OBi100 with nothing connected to it, the left-most LED should be red and then turn to flashing green.

It is DOA then. No lights, period. Thank you.

Title: Re: Plugged in OBi100, no LED
Post by: flipdee on March 14, 2012, 02:49:22 AM

Test the power supply if can.
Sadly the one thing that lets the obi hardware down is the power supplies.
I've had a power supply fail myself.
Best regards,
Flipdee

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: BrianJM on March 13, 2012, 10:59:31 AM