OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: giribt on March 17, 2012, 09:04:40 PM

Title: Not able to "Add Device" in obihai for OBi110
Post by: giribt on March 17, 2012, 09:04:40 PM
I have bought this new OBi110 from Amazon, I am trying to "Add device" using obihai.com website, but it doesn't seem tobe working.

I could access obi110 via local network i.e., 192.168.1.xxx without any issue.
I did Autoprovisioning and enabled fireware upgrade also
When I dial **9 222-222-222, it says it can't reach.

Not sure if there is a hardware issue.

Regards,
Giridhara
giribt@gmail.com
Title: Re: Not able to "Add Device" in obihai for OBi110
Post by: RonR on March 17, 2012, 09:20:22 PM
Try temporarily connecting the OBi directly to your modem, bypassing your router.  Power-cycle both the modem and the OBi after making the direct connection.  After waiting sufficient time for both units to get booted up, try **9 222 222 222 again.
Title: Re: Not able to "Add Device" in obihai for OBi110
Post by: giribt on March 17, 2012, 09:54:27 PM
It works when connected directly to modem.  It doesn't work when I connect to firewall.

Regards,
Giridhara
Title: Re: Not able to "Add Device" in obihai for OBi110
Post by: RonR on March 17, 2012, 10:25:51 PM
Then the problem is likely with your router/firewall and not the OBi.

What router/firewall are you using?

As a temporary fix, you might try setting the DMZ address to the OBI's LAN address.