i am a total noobie here,
is it possible to set it up that whenever i dial a number starting with "0" it automatically routes to sp2 but all other calls route through sp1 ( which i have set as default)?
i am using it internationally, where i have GV and a local sip. All the local numbers here start with "0" so i ould be cool to route it that i can avoid calling up the sp 2 every time i need it.
Is SP1 configured for Google Voice and US/Canada calling? If not, please describe the number format.
Is there a pattern (length, etc.) to the numbers that start with 0 which should be redirected to SP2?
Quote from: RonR on March 24, 2012, 04:34:50 PM
Is SP1 configured for Google Voice and US/Canada calling? If not, please describe the number format.
Is there a pattern (length, etc.) to the numbers that start with 0 which should be redirected to SP2?
sp1 is gv.
sp2 is the local sip number
all the local numbers start with 0. they are either 9 or 10 digits
no US/canada numbers start with 0.
i guess thats a pattern!
Service Providers -> ITSP Profile A -> General -> DigitMap:
(<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.|<**2>0xx.)
Service Providers -> ITSP Profile B -> General -> DigitMap : (0xx.|(Mipd)|[^*#]@@.'@'@@.)
This assumes that none of the local numbers begin with 011.
10 digits -> SP1 (beginning with 2-9)
11 digits -> SP1 (beginning with 1)
011+ -> SP1
0+ -> SP2
Thank You!
I will try it soon!
If it works, your awesome!
worked like a charm!
your the man!