Print Page - How to reach an Obi110 from a SPA2102 on the same lan

Title: How to reach an Obi110 from a SPA2102 on the same lan
Post by: dani on April 09, 2012, 11:10:01 PM

On my network I have a 2102 and a Obi110. They are separate sub-accounts of the same voip.ms acct, and the obi also has GV and PSTN.

Was wondering how to call out through GV from the phone connected to the 2102.
Is there a way to have both ATAs talking over the lan without going out to voip.ms server and in again?
If not, can I use the voip.ms "extensions" feature between sub-accounts to reach the Obi from the 2102?
How can I route a call coming from the 2102 to the IVR (to request dialtone) or directly to call out any destination over GV?

Thanks

Title: Re: How to reach an Obi110 from a SPA2102 on the same lan
Post by: RonR on April 09, 2012, 11:18:56 PM

Single-Stage Dialing Through Any OBi Trunk Using SIP (http://www.obitalk.com/forum/index.php?topic=2454.0)

Title: Re: How to reach an Obi110 from a SPA2102 on the same lan
Post by: dani on April 10, 2012, 12:06:51 AM

THanks!

Dani

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: dani on April 09, 2012, 11:10:01 PM