Print Page - obiapp and x lite can't place a call

Title: obiapp and x lite can't place a call
Post by: HenriqueBR on April 15, 2012, 11:51:18 AM

hi,

Setup obiapp and x lite, but guess I'm missing something. Whenever I try to dial any number through the x lite app, it calls the phone attached to the obihai device. I thought I could use x lite to call using obihai, and it could route through the sip/gv/line configured in the system.

What should I do?

this is the syslog, whenever I try to use the x lite

[Apr 15 15:48:11][192.168.2.125]<7> [SLIC] CID to deliver: '' 290427600

Title: Re: obiapp and x lite can't place a call
Post by: RonR on April 15, 2012, 12:06:44 PM

The following will route calls from an OBi, OBiON App, or OBiAPP for PC to the Auto Attendnat of an OBi:

Voice Services -> OBiTALK Service -> InboundCallRoute : {290123456:aa},{ph}

The following will route calls from an OBi, OBiON App, or OBiAPP for PC through a particular trunk of an OBi:

Voice Services -> OBiTALK Service -> InboundCallRoute : {290123456>(Mtrunk):trunk},{ph}

where 290123456 is the OBi, OBiON App, or OBiAPP for PC OBiTALK number and trunk is sp1, sp2, li, etc.

For a more flexible approach, see

Single-Stage Dialing Through Any OBi Trunk (http://www.obitalk.com/forum/index.php?topic=1103.0)

and

Single-Stage Dialing Through Any OBi Trunk Using SIP (http://www.obitalk.com/forum/index.php?topic=2454.0)

Title: Re: obiapp and x lite can't place a call
Post by: HenriqueBR on April 15, 2012, 12:09:25 PM

hey thanks, gonna try it later

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: HenriqueBR on April 15, 2012, 11:51:18 AM